UltraPrimer 105, Primaire époxy tous supports, anti-corrosif
Two-component epoxy primer
Ideal for mastics and very thick epoxy undercoats
Adheres to all types of substrate: aluminium, steel, stainless steel, fibreglass and wood
Excellent results on surfaces exposed to extreme conditions
Anti-corrosion pigments guarantee the ability to prevent corrosion
Consulter la description complète
Ultra primer 105 epoxy, all-surface adhesion, anti-corrosive
Two-component epoxy primer that guarantees excellent results even when applied as a first coat to surfaces exposed to particularly critical environmental conditions such as those found in the world of yachting.
Its formulation ensures good adhesion to all types of surface: aluminium, steel, stainless steel, fibreglass and wood. It is therefore an ideal base for mastics and very thick epoxy undercoats. Its anti-corrosive pigment content ensures it can prevent corrosion on metal surfaces.
It can be used both above and below the waterline on yachts if used in accordance with the technical instructions supplied.
Mixture: 2/1 ratio
Colour: rust
Application temperature: 10 to 30 degrees
Can be applied by brush, roller or spray gun.
Coverage: 7.3 to 11.8m²/L
Time at 21 degrees: pot life 6 hours, sandable after 18 hours, fully cured in 7 days
Available in 750ml, 2500ml and 15 litres.
Data sheet
- Packaging
- 0,75L
- Consumption
- 7.3 à 11.8m²/L
- Polymerization time
- 18h
- Total polymerization time
- 7 jours
- Color
- Rouge oxyde
- Mixing ratio
- 2:1