UltraCoat 630 - Epoxy undercoat for filling and finishing
Two-component epoxy primer / undercoat
Adheres to all types of substrate: aluminium, steel, stainless steel, fibreglass and wood
Ideal primer for various paint cycles and anti-osmosis treatments
Ideal intermediate layer between the epoxy base cycle (UltraPrimer 105 and epoxy fillers) and the finishing cycle
Consulter la description complète
A very thick, two-component epoxy undercoat that guarantees excellent results even when applied to surfaces exposed to particularly critical environmental conditions, such as those found in the world of yachting.
Its formulation ensures good adhesion to all types of surface: aluminium, steel, stainless steel, fibreglass and wood.
It is therefore an ideal undercoat for various paint systems and an ideal intermediate layer between a basic epoxy cycle (UltraPrimer 105 and epoxy fillers) and the finishing cycle.
For anti-osmosis treatments, it is the most appropriate product to use as an undercoat, after the epoxy resin has been applied.
It can be used both above and below the waterline on boats if used in accordance with the technical instructions supplied.
Colour: white
Theoretical coverage: 4.1 - 6.2m²/L
Do not use when ambient temperature is below 10°C and above 30°C.
Pot life 6h at 21°C
Mixing ratio: 1/2
Colour: white
Apply by brush, roller or spray.
Coverage: 7.3 to 11.8m² per litre
Available in 750ml, 2500ml and 15 litres.
Data sheet
- Packaging
- 0,75L
- Consumption
- 4,1 à 6,2m²/L
- Polymerization time
- 18h
- Total polymerization time
- 7 jours
- Color
- Blanc / Gris
- Mixing ratio
- 2:1