English GB- Pro-Set TLG-625-R : Low-density resin
- Specially designed for levelling and profiling composite structures.
- Packaging : available in 8.2 kg and 20 kg sizes
- Consistency : pre-thickened, simplifies mixing and application
- Once cured, epoxy is easily sanded
- Can be applied at thicknesses of up to 12 mm without sagging.
- Consumption of 6.4 liters of mix covers 1m² for 6mm thickness
Consulter la description complète
PRO-SET's TLG-625-R is a low-density filler specially designed for patching and profiling composite structures.
Its pre-thickened consistency simplifies mixing and application (you don't need to add fillers).
It can be applied at thicknesses of up to 12mm without sagging. Additional application is required to fill deeper voids.
Once cured, the epoxy sands easily.
- Consumption of 6.4 liters of mix covers 1m² for 6mm thickness.
- Resin packaging : available in 8.2 kg and 20kg
Epoxy resins and hardeners are sold separately.
- Hardener packaging : available in 4.6 kg and 11.2 kg
- Mixing ratio by weight : 1.79:1 (Resin:Hardener)
- Mixing ratio by volume : 1:1 (Resin:Hardener)
Technical properties TLG-625-R
- Compressive strength : 23 MPa
- Hardness (Type D) : 62
- 100ml Pot life at 22°C : 31-39 minutes
- 500ml Pot life at 22°C : 27-33 minutes
- Approximate working time, 6.4mm application at 22°C: 90 minutes
- Sanding time, 6.4mm application at 22°C: 8 hours
For further information, please consult the product data sheet.
Please sign in first.
Sign in
