PRO-SET TLG-625-H 4.6KG low density fairing putty hardener
- TLG-625-H : Pro-Set hardener
- For use with TLG-625-R resin
- Specially designed for levelling and profiling composite structures.
- Packaging : available in 4.6 kg and 11.2 kg sizes
- Consistency : pre-thickened, for easy mixing and application
- Once cured, the epoxy sands easily.
- Can be applied at thicknesses of up to 12 mm without sagging.
- Consumption of 6.4 liters of mix covers 1m² for 6mm thickness
Consulter la description complète
PRO-SET TLG-625 is designed for levelling and profiling composite structures.
Its pre-thickened consistency makes it easy to mix and apply. No filler is required.
It can be applied at thicknesses of up to 12mm without sagging. To fill deeper voids, an additional application is required.
Once cured, the epoxy sands easily.
- Consumption of 6.4 liters of mixture covers 1m² for 6mm thickness.
- Hardener packaging : available in 4.6 kg and 11.2 kg.
Epoxy resins and hardeners are sold separately.
- Resin packaging : available in 8.2 kg and 20kg
- Mixing ratio by weight : 1.79:1 (Resin:Hardener)
- Mixing ratio by volume : 1:1 (Resin:Hardener)
Technical properties TLG-625-R
- Compressive strength : 23 MPa
- Hardness (Type D) : 62
- 100ml Pot life at 22°C : 31-39 minutes
- 500ml Pot life at 22°C : 27-33 minutes
- Approximate working time, 6.4mm application at 22°C : 90 minutes
- Sanding time, 6.4mm application at 22°C : 8 hours
For further information, please consult the product data sheet.