PRO-VAC: Comsumable for vacuum infusions

Non-reinforced teflon high temperature adhesive tape, 25mm wide, 33m long, 260°C

Delays of 3 to 4 weeks

Non-reinforced teflon high temperature adhesive tape, 25mm wide, 33m long, 260°C

€237.60 (VAT incl.)

Sur commande

Non-reinforced high-temperature silicone PTFE adhesive tape, 25mm wide, 33m long, 260°C

Add to cart

Nylon peel ply 15cm wide

Delay of 2 weeks

Nylon peel ply 15cm wide

€84.54 (VAT incl.)

Sur commande

Nylon tear away fabricsDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Nylon 66 peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 30cm. 85 g/m²

On order. Delay of about 3 to 4 weeks.

Nylon 66 peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 30cm. 85 g/m²

€169.01 (VAT incl.)

Sur commande

Nylon 66 tear away fabricsDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon) 300mm x 100ml

Add to cart

Nylon peel ply 50cm wide

Delay of 2 weeks

Nylon peel ply 50cm wide

€2.82 (VAT incl.)

Sur commande

Nylon tear away fabricsDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Polyester peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 15cm. 85g/m²

On order. Delay of about 3 to 4 weeks.

Polyester peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 15cm. 85g/m²

€31.20 (VAT incl.)

Sur commande

Polyester peel plyDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Polyester peel ply 30cm wide

Delay of 2 weeks

Polyester peel ply 30cm wide

€73.18 (VAT incl.)

Sur commande

Tear-off fabric 85g/m² polyester 180°c30 cm widesold by R100ml

Add to cart

Polyester peel ply 50cm wide

Delays of 3 to 4 weeks

Polyester peel ply 50cm wide

€121.97 (VAT incl.)

Sur commande

Polyester peel plyDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm

En stock

Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm

€9.08 (VAT incl.)

In stock

A breathable fabric used to evacuate air from a laminate before and during curing.Its most common use is for prepregs in the demolding and curing stages.Used to:- evacuate air between plies as the laminate thickness...

Add to cart

PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm

En stock

PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm

€6.38 (VAT incl.)

In stock

Breathable fabric used to evacuate air from a laminate before and during curing.Maximum use: up to 210°c150G/m² weightWidth: 152cmSold by 5 meters minimum

Add to cart

PRO-VAC: Comsumable for vacuum infusions

Subcategories

Vacuum bags

Fabrics and special films

Supplies and special adhesives

Non-reinforced teflon high temperature adhesive tape, 25mm wide, 33m long, 260°C

Nylon peel ply 15cm wide

Nylon 66 peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 30cm. 85 g/m²

Nylon peel ply 50cm wide

Polyester peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 15cm. 85g/m²

Polyester peel ply 30cm wide

Polyester peel ply 50cm wide

Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm

PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm

Menu