Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm
A breathable fabric used to evacuate air from a laminate before and during curing.
Its most common use is for prepregs in the demolding and curing stages.
Used to:
- evacuate air between plies as the laminate thickness increases
- evacuate any gas produced during the curing cycle
- Absorb resin by hand/wet lamination
sold by 5 meters minimum
Consulter la description complète
Breathable fabric is used to evacuate air from a laminate before and during curing. Its most common use
is that of prepreg products in the demoulding and curing stages. Used for :
- evacuating the air between the plies as the thickness of the laminate increases
- evacuate any gas produced during the curing cycle
- Resin absorption by manual/wet lamination
PET drainage felt
Good capacity and works well with simple curves and complex parts.
Good for the pressure process in autoclave and can be used in multiple layers to increase the flow capacity.
Data sheet
- Brand
- PRO-VAC
- Width
- 152cm
- Max. operating temperature
- 210°C
- Type of product
- Breather fabric