M1007 - Cartouche Collage 5min

Pro-Set's high-performance Rapid Epoxy Adhesive is composed of M1007 for the resin and M2012 for the hardener.

This system is formulated for adhesive applications requiring an extremely fast setting time, in just 5 min at room temperature, and reaches full polymerization in 7 days.

The viscosity of the adhesive is medium and the mixture is almost colorless.

Epoxy is compatible with a multitude of materials: metals, ceramics, composites, glass, steel and aluminum.

Offers robust, long-lasting strength.

Surface preparation :

All surfaces to be bonded must be degreased with a solvent such as acetone or WEST SYSTEM 850.

Remove all sanding dust with a clean brush.

Make a final stroke with a clean cloth soaked in solvent to remove amines and dust.

Application instructions: 

Use a standard caulking gun in a suitable, clean, dry container.

Mix with a spatula.

After mixing, immediately apply a thin coat to both prepared surfaces.

Press the surfaces together, eliminating air, and hold them in position until the resin polymerizes.

At room temperature, bonding strength will continue to develop for around 7 days.

- Mixing ratio by volume : 1:1 (Resin:Hardener)

Technical properties M1007/2012

Gelling :

- 100g mass at 25°C : 4min

- Thin film at 25°C : 5 min 

- Thin film at 7°C : 20min 

Typical bond strength :

Pour plus des informations complémentaires, consultez la fiche technique du produit.