The mini pumps consist of two separate parallel pump systems, one for the resin and one for the hardener. The pumps mount directly on the resin and hardener canisters and are calibrated to provide the right ratio of
The pump supplies 25 gr of resin and 8.5 gr of hardener.
Allows you to dispense the epoxy quickly, without loss, with the correct amount.
The pump is calibrated for a ratio of 3:1.
To dispense the epoxy, simply pump out the resin and hardener.
The special transparent hardener 207 developed for fiberglass coatings and fabrics, where a clear, moisture resistant and natural finish is desired.
Sold without pumpPump needed : wS303A ( ref WS303A)
How to dose and...
Resin 105 is the basis of WEST SYSTEM products from which all WEST SYSTEM components are made.Sold without pumps.Pump needed : 301-A ( ref WS301A)How to dose and mix your epoxy ?Product selection guideVideo...
Notched Spreader for rapid application of thickened epoxy on large surfaces.
The thin, straight edge is ideal for applying layers of reinforcing fabrics.
Used to laminate large panels.
Sold in packs of 36 Spatulas...