Fast hardener 205-A 200g

Hardener 205 used in situations where rapid curing is required. This hardener makes it possible to have an epoxy mixture whose physical properties develop rapidly.

Produces a rigid solid, high strength, is a remarkable protection against water vapor, excellent bonding property and plaster

Pot life at 25°C : 10 to 15 minutes

Curing to solid state at 21°C : 5 to 7 hours

Hardening up to maximum resistance at 21°C : 5 to 7 days

Minimum recommended working temperature: 5°C

Consumption :

for a mixture of 1kg on a porous surface at 25 ° C: 6.5 - 7.5 m²

for a mixture of 1kg on a non-porous surface at 25 ° C: 8.5 - 9.5 m²

Caution : For each size of resin can, there is a size of hardener can and a size of corresponding mini pumps. Make sure all cans and the pump have the same letter (A, B, C or D). If you have any doubt, do not hesitate to contact our customer service.

Dosing : Mini pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make a resin pressure for a hardener pressure.

Mixing : Mix resin and hardener for two minutes or longer at low temperatures. Scrape the sides and bottom of the pot when mixing.

Dosing and mixing demonstration video