×

502 black liquid colorant for West System epoxy resin, 125g.

Liquid epoxy colorant used to tint the epoxy mixture black, providing a uniform black color base.

One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.

We suggest using very small amounts of pigment, about 5% by weight.

Read more

Consulter la description complète

€21.52 (VAT incl.)
2 Items En stock

Quantity :

Volume discounts

Quantity Discount You Save
2 4% €1.72
3 6% €3.87
4 8% €6.89
6 10% €12.91
Reference WS502-1

A question about this product?

Description

502 Black Pigment is an epoxy-based liquid colorant used to tint the epoxy mixture black, providing an even, black color base for the final finish system. Colored surfaces also tend to highlight flaws and imperfections.

Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.

Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigments will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.

Adding a coloring agent to WEST SYSTEM® Epoxy is frequently done to make colored castings, highlight an epoxy-coated surface, act as a colored base coat for paint, etc. Most powdered pigments are satisfactory, as are acrylic paste pigments and universal tinting pigment.

Adding pigment to epoxy should, like everything in life, be done in moderation. Without exception, adding pigment to WEST SYSTEM Epoxy will weaken the cured mixture to some degree. Because of this, we suggest you use very small amounts of pigment, about 5% by weight. As a result, thin films of colored epoxy are somewhat transparent. It usually requires several coats to make the film opaque.

WEST SYSTEM pigments are available in three colors, white, black and gray. We suspend the pigments in an epoxy resin base which allows them to blend thoroughly into the epoxy to make very uniform colors. Because the pigment has an epoxy resin base, it is important not to add more than the recommended amount. Adding an excessive amount of pigment to the epoxy could alter the resin/hardener ratio, compromising cured epoxy performance.

If you need to make a tinted epoxy putty for filling defects, mix WEST SYSTEM epoxy with 406 Colloidal Silica Filler to make the putty. The addition of 406 to the epoxy results in an easily colored, smooth, off-white paste that can be tinted with one of the pigments.

Epoxy, tinted or clear, does not have good UV light resistance. An epoxy coating exposed to UV will yellow, become opaque, and eventually flake off. This process takes a while and if the object you are coating has limited exposure to sunlight, a colored epoxy coating will hold up for years.

Read more
Product Details

Data sheet

WEST SYSTEM products
Dye
Related products
5/5 basé sur 1 review
€35.69 (VAT incl.)
In stock
Special Clear Hardener 207 is developed for the application of fiberglass coatings and fabrics where a clear, moisture resistant, natural finish is desired. Epoxy 105/207 has strong physical properties, so it can be...
5/5 basé sur 1 review
€24.17 (VAT incl.)
In stock
Slow Cure 206 is a low viscosity epoxy curing agent for extended working time and where a longer cure time is required. When combined with Epoxy 105, the cured resin/hardener mixture produces a rigid, high strength,...
5/5 basé sur 1 review
€24.17 (VAT incl.)
In stock
WEST SYSTEM 205 Fast Hardener is a medium viscosity epoxy hardener. It is useful in most bonding situations, and at lower temperatures. The combination of 105 resin and 205 hardener provides excellent adhesion and...
5/5 basé sur 1 review
€41.08 (VAT incl.)
In stock
Resin 105 is the base for WEST SYSTEM products from which all WEST SYSTEM components are made. Excellent adhesive, fills holes and recesses when modified with WEST SYSTEM fillers. Prevents and repairs damage caused...

Menu