BoviProtect kit (20 kg) : for the protection of livestock floors
Consulter la description complète
BoviProtect kit, protection & renovation of livestock floors
Polyurethane resin designed for the renovation of vehicle floors as well as the protection of the floors of new and old livestock houses and the comfort of transporting non-trained animals.
3-component resin
Shrink-free, waterproof resin. This resin can be applied on steel, aluminium, chipboard.
Good resistance to wear, abrasion, acids, oils, gas oils.
High water cleaning, high pressure cleaner.
The BoviProtect kit contains :
- a resin
- a hardener
- sand (0.2 or 0.3 mm quartz) + rubber
- Basalt (non-slip)
Resin preparation
Caution: not suitable for bakelized wooden floors!
Application: substrate temperature must be between 10°C and 25°C.
Strip the floor by the action of sandblasting, if you have existing holes you will have to fill them up beforehand.
Pour the hardener into the resin pot and mix for 2 to 3 minutes. Empty the resin/hardener mixture into a large, clean container and add the 3rd component (sand + rubber).
Mark out a surface of 2m² or 4m² depending on the kit chosen then apply your resin over the entire surface.
Watch the setting, when the resin is still soft sprinkle the basalt for the anti-slip. Caution, watch that the anti-slip seals in the resin but does not sink!
Indicative monitoring time :
Summer: approx. 30 min at 25°C
Winter: about 1h to 1h30 depending on the temperature
Consumer
kit of 20kg = 2m².
40kg kit = 4m².
Data sheet
- Brand
- RESINE-NET
- Packaging
- 20kg
- Consumption
- 2m²
- Open time
- 40 min
- Color
- Green
- Use of the resin
- Vehicle
-
Produit complémentaire à celui de 40 kg
Customer reviews
-
Produit complémentaire à celui de 40 kg