Hardeners for INF-114 resin - PRO-SET
INF-210 Fast Infusion Hardener
Fast Infusion Hardener 210 for Epoxy Infusion 114
Consulter la description complète
PRO-SET's INF-114 infusion epoxy resin is an ultra-low viscosity system, accompanied by a range of hardeners designed to meet the demands of modern infusion processes.
These epoxies produce lightweight composites with superior performance, capable of withstanding long-term recurring loads in demanding environments.
They can be post-cured to further optimize performance, and develop excellent physical properties at room temperature.
- Hardeners : fast (210), medium (211), slow (212) and super-slow (213) cure.
- Hardener packaging : available in 1.37kg, 6.86kg, 61.65kg and 274kg
- Resin packaging : available in 5kg, 25kg, 225kg and 1000kg
- Mixing ratio by weight : 3.65:1 (Resin:Hardener)
- Mixing ratio by volume : 3:1 (Resin:Hardener)
- Hardness (Type D) : 86
Technical properties INF-117G / INF-210 (72°F (22°C) x 4 weeks)
- Mixed viscosity 22°C : 304 mPas
- Compressive strength : 14.7 MPa
- Tensile strength : 8.670 MPa
- Tensile elongation : 2%
- Flexural strength : 13.5 MPa
- Ultimate Tg by DMA : 165°C
Technical properties INF-117G / INF-211 (72°F (22°C) x 4 weeks)
- Mixed viscosity 22°C : 296 mPas
- Compressive strength : 14.7 MPa
- Tensile strength : 7.770 MPa
- Tensile elongation : 1.7
- Flexural strength : 12.3 MPa
- Ultimate Tg by DMA : 158°C
Technical properties INF-117G / INF-212 (72°F (22°C) x 4 weeks)
- Mixed viscosity 25°C : 294 mPas
- Compressive strength : 14.6 MPa
- Tensile strength : 8 MPa
- Tensile elongation : 1.8
- Flexural strength : 12.8 MPa
- Ultimate Tg by DMA : 156°C
Technical properties INF-117G / INF-213 (72°F (22°C) x 4 weeks)
- Mixed viscosity 25°C : 325 mPas
- Compressive strength : 15 MPa
- Tensile strength : 7.9 MPa
- Tensile elongation : 1.8
- Flexural strength : 11.9 MPa
- Ultimate Tg by DMA : 155°C
For further information, please consult the product data sheet.