Colourless resin for stone carpets
MultiEpox is a translucent two-component epoxy binder suitable for multiple applications: agglomerating materials such as quartz, dust finishing or sealing parts.
Self-smoothing resin with a glossy appearance, mainly used for agglomerating various materials (quartz, pebbles, etc.).
Main uses: zeroing, mortar, anchors and dust sealant.
Substrate preparation: Substrates must be dry, free of dust, grease, oil, moisture, curing agent, loose or friable parts and must not be subject to rising damp by capillary action. Stripping is done by mechanical action (sandblasting, planing, shot-blasting, diamond sanding).
Preparation of the mixtures: The components (Comp.A resin + Comp.B hardener) are delivered pre-dosed and should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator fitted with a helical blade (right-hand pitch) with a diameter approximately 2.5 times smaller than the diameter of the seal.
For a zero pull: Add HN 34 / HN 38 quartz in a ratio of 1kg to 1kg. Application with a squeegee.
For a mortar: First mix the 2 components and then incorporate our mortar aggregates or quartz HN 31 in a ratio of 1 kg MultiEpox (resin + hardener) for 6 kg of quartz or aggregates. Spread the mixture over the fresh primer and float it with a steel trowel.
For a primer (roller application): 0.250 to 0.400 kg/m² depending on the porosity of the substrate.
For a zero pull (Application with a smooth or notched squeegee): 1 to 2 kg/m².
For a mortar (Application with a trowel) : for 5 mm thickness 11 Kg/m² / for 10 mm thickness : 22 Kg/m².