Main uses: levelling wood and concrete floors to glue or easily lay all kinds of floor coverings: parquet, floating parquet, linoleum, carpeting...
Consumption: consumption depends on the condition of the substrate. Approximately 1.5 - 3kg/m² for a thickness of 3mm.
Substrate preparation: Substrates must be dry, free of dust, grease, oil, moisture, curing agent, loose or friable parts and must not be subject to rising damp by capillary action. Stripping is done by mechanical action (sanding, planing, shot-peening, diamond sanding).
The use of our solvent-free epoxy primer POXYFIRST is strongly recommended. For steel and aluminium, the preparation of the surface is done by sandblasting with a minimum degree of care SA 2.5.
Preparation of the mixtures: The components (Comp.A resin + Comp.B hardener) are delivered pre-dosed and should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator equipped with a helical blade (right-hand pitch) with a diameter approximately 2.5 times smaller than the diameter of the bucket.