English GBTransparent two-component epoxy resin for the realization of river table or stone carpets. Possibility to colour the resin with pigments or dyes.
Consulter la description complète
PoxyRiver, transparent epoxy resin for making river table and/or stone carpeting
Two-component epoxy resin used as interior stone carpeting or casting resin. Continuous, non-shrink, waterproof coating.
Good resistance to wear, acid abrasion, UV
Main uses: home, office, showroom, showroom, river table, casting into objects
Use in casting resin
Mix 3.5 parts resin and 1.5 parts hardener for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator equipped with a helical paddle with a diameter about 2.5 times smaller than the diameter of the seal.
Pour 1.5 to 2 cm of the mixture per layer.
Wait 4 to 6 hours between each layer at a temperature of 20°C.
Before casting, impregnate the wood with a brush.
When making, place on polyane or plywood board.
Theoretical density of the mixture: 1,11
Use in stone carpets
Mix the two components for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator equipped with a helical blade (right-hand pitch) with a diameter about 2.5 times smaller than the diameter of the seal.
Leave the mixture to stand for 10 minutes, the maturing time necessary to obtain a perfectly cross-linked, resistant and aesthetically pleasing coating.
After this time, a second, coarser mixing must be done to homogenize the whole.
For the coating of a semi-smooth coloured quartz 0.4/0.8 coating, the application is done with a rubber squeegee.
Consumption: 0.600 to 0.700 kg/m².
For a stone carpet, mix 6 to 8% of the mixture, calculated according to the weight of the aggregates (marble or coloured quartz 3 to 5mm). Mix the resin and the aggregates with a mixer powerful enough to homogenize the whole. Spread the mixture evenly over the floor and then tighten and smooth with a trowel.
Consumption: 0.600 to 0.700 kg/m².
Data sheet
Please sign in first.
Sign in
