×

Hardener 207C WEST SYSTEM/7.2 Kg for 105C resin

The special transparent hardener 207 developed for fiberglass coatings and fabrics, where a clear, moisture resistant and natural finish is desired.

Sold without pump

Pump needed : 303-C ( ref WS303C)

How to dose and mix your epoxy ?

Product selection guide

Demonstration video on basic, advanced, repair techniques

Read more
Reference WS207C
En stock 4 Items
€448.93 (VAT incl.)

Volume discounts

Quantity Discount You Save
2 2% €17.96
3 3% €40.40
4 4% €71.83
5 5% €112.23
7 6% €188.55

Quantity :

Make a request for this product

Description

A coating hardener 207 containing ultraviolet inhibitors thereby protecting the 105/207 mixture from light and sun.

Conditioning : 2x3.6 kg

Sold without pump

Pump needed : S303C ( ref WS303C)

Coating hardener 207 has been formulated for use with resin 105 for applications where an extremely transparent finish is desired.

This hardener offers excellent adhesion properties for bonding applications.

It contains ultraviolet inhibitor that protects the 105/207 mixture from sunlight. However, the surface, once cured, requires long-term UV protection.

Pot life at 25 ° C : 20 to 30 minutes

Curing to solid state at 21 ° C : 9 to 12 hours

Hardening up to maximum resistance at 21 ° C : 5 to 7 days

Minimum recommended working temperature : 16 ° C

Consumption :

for a mixture of 1kg on a porous surface at 25 ° C: 7 - 8 m²

for a mixture of 1kg on a non-porous surface at 25 ° C: 9 - 10 m²

Caution : For each size of resin can, there is a size of hardener can and a size of corresponding mini pumps. Make sure all cans and the pump have the same letter (A, B, C or D). If you have any doubt, do not hesitate to contact our customer service.

Dosing : Mini pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make a resin pressure for a hardener pressure.

Mixing : Mix resin and hardener for two minutes or longer at low temperatures. Scrape the sides and bottom of the pot when mixing.

Read more
Product Details
WS207C

Data sheet

Brand
WEST SYSTEM
Packaging
2X3.6 KG
Consumption
7 - 8 m² for 1kg of mixture (porous surface)9 - 10 m² for 1 kg of mixture (non-porous surface)
Open time
20 to 30 minutes
Polymerization time
9 to 12 hours
Total polymerization time
5 to 7 days
Reviews
No comments
Related products
€34.37 (VAT incl.)
The special transparent hardener 207 developed for fiberglass coatings and fabrics, where a clear, moisture resistant and natural finish is desired. Sold without pumpPump needed :  wS303A ( ref WS303A) How to dose and...
€461.60 (VAT incl.)
105C resin is the basis of WEST SYSTEM products from which all WEST SYSTEM components are made. Sold without pumps. How to dose and mix your epoxy? Product selection guide Demonstration video on basic, advanced and...

Menu