Slow hardener 206-F 200 kg

Slow Cure 206 is a low viscosity epoxy curing agent for extended working time or longer curing time is required.

Sold without pump

How to dose and mix your epoxy?

Product selection guide

Demonstration video on basic, advanced and repair techniques

Read more
Reference WS206F
On order: delays of 1 to 2 weeks approximately
€4,342.88 (VAT incl.)

Volume discounts

Quantity Discount You Save
2 2% €173.72
3 3% €390.86
4 4% €694.86
5 5% €1,085.72
7 6% €1,824.01

Make a request for this product


206 Slow hardener of low viscosity when mixed with resin 105

Conditioning : 200 kg

Model : F

Slow hardener of low viscosity.

Produces a rigid solid, high strength, moisture resistant, excellent bonding and coating property.

Can be used to extend assembly times under ideal working conditions.

Pot life at 25°C : 20 to 30 minutes

Curing to solid state at 21°C : 9 to 12 hours

Hardening up to maximum resistance at 21°C : 5 to 7 days

Minimum recommended working temperature : 16°C

Consumption :

for a mixture of 1kg on a porous surface at 25 ° C: 6.5 - 7.5 m²

for a mixture of 1kg on a non-porous surface at 25 ° C: 8.5 - 9.5 m²

Caution : For each size of resin can, there is a size of hardener can and a size of corresponding mini pumps. Make sure all cans and the pump have the same letter (A, B, C or D). If you have any doubt, do not hesitate to contact our customer service.

Dosing : Mini pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make a resin pressure for a hardener pressure.

Mixing : Mix resin and hardener for two minutes or longer at low temperatures. Scrape the sides and bottom of the pot when mixing.

Read more
Product Details

Data sheet

200 kg
6.5 - 7.5 m² for 1kg of mixture (porous surface)8.5 - 9.5 m² for 1 kg of mixture (non-porous surface)
Open time
20 to 30 minutes
Polymerization time
9 to 12 hours
Total polymerization time
5 to 7 days
WEST SYSTEM products
No comments
Related products