Fabrics and special films (2)

Delay of 2 weeks

Polyester peel ply 20cm wide

€48.79 (VAT incl.)

Out of stock

Polyester peel plyDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Polyester peel ply 30cm wide

Delay of 2 weeks

Polyester peel ply 30cm wide

€73.18 (VAT incl.)

Out of stock

Tear-off fabric 85g/m² polyester 180°c30 cm widesold by R100ml

Add to cart

Polyester peel ply 50cm wide

Delays of 3 to 4 weeks

Polyester peel ply 50cm wide

€121.97 (VAT incl.)

Out of stock

Polyester peel plyDesigned for composite treatments.Allows to leave a finish that facilitates sanding.Do not use with phenolic resins (for nylon)

Add to cart

Slow draining separator film (P31) for vacuum infusion. RE-MESH. Max: 120-125°C. PRO-VAC

En stock

Slow draining separator film (P31) for vacuum infusion. RE-MESH. Max: 120-125°C. PRO-VAC

€11.15 (VAT incl.)

In stock

RE-MESH is a slow draining separator film (P31) used for vacuum infusion.Composed of a polyolefin separation film PRO-VAC 500 P31 and a blue sheet PROVAC KM160B 150g/m².Saves time in setting up the infusion.Less glue...

Add to cart

Microporous vacuum line fast flow, blocks the resin, allows air to flow, 300mm wide, 150°C

Delay of 2 weeks

Microporous vacuum line fast flow, blocks the resin, allows air to flow, 300mm wide, 150°C

€16.85 (VAT incl.)

Out of stock

Microporous vacuum line for fast airwidth 300mm 150°c

Add to cart

Microporous vacuum line fast flow, blocks the resin, allows air to flow, 150mm wide, 150°C

Delay of 2 weeks

Microporous vacuum line fast flow, blocks the resin, allows air to flow, 150mm wide, 150°C

€8.16 (VAT incl.)

Out of stock

Microporous vacuum line for fast airwidth 150mm 150°c

Add to cart

Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm

En stock

Breathable PET fabric. Evacuates any gas produced during the curing cycle. Max: 210°C. 300G/m². Width: 152cm

€9.08 (VAT incl.)

In stock

A breathable fabric used to evacuate air from a laminate before and during curing.Its most common use is for prepregs in the demolding and curing stages.Used to:- evacuate air between plies as the laminate thickness...

Add to cart

PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm

En stock

PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm

€6.38 (VAT incl.)

In stock

Breathable fabric used to evacuate air from a laminate before and during curing.Maximum use: up to 210°c150G/m² weightWidth: 152cmSold by 5 meters minimum

Add to cart