10 Item Items
Last items in stock!
Anti-slip polyurethane cattle flooring resin designed for the protection of new and old cattle floors as well as for the comfort of transporting non-railed animals.
Shrink-free, waterproof resin. This resin can be applied on steel, aluminium, chipboard.
Good resistance to wear, abrasion, acids, oils, gas oils.
High water cleaning, high pressure cleaner.
The BoviProtect kit contains :
- a resin
- a hardener
- sand (0.2 or 0.3 mm quartz) + rubber
- Basalt (non-slip)
Caution: not suitable for bakelized wood floors!
Application: substrate temperature from 10°C to 25°C
Strip the floor by the action of sandblasting, if you have existing holes you will have to fill them up beforehand.
Pour the hardener into the resin pot and mix for 2 to 3 minutes. Empty the resin/hardener mixture into a large, clean container and add the 3rd component (sand + rubber).
Mark out a surface of 2m² or 4m² depending on the kit chosen then apply your resin over the entire surface.
Watch the setting, when the resin is still soft sprinkle the basalt for the anti-slip. Caution, watch that the anti-slip seals in the resin but does not sink!
Indicative monitoring time :
Summer: approx. 30 min at 25°C
Winter: about 1h to 1h30 depending on the temperature
Kit of 20kg = 2m².
40kg kit = 4m².
|Open time||40 min|