Rapid Foam Epoxy Kit 2.52L

Two-component epoxy foam for lamination, assembly, and bonding...

2kg resin / 08kg hardener

When you mix the resin and hardener, the epoxy mixture becomes a uniform foam.

Fast epoxy suitable for many components and structures.

High performance foam, adheres to FRP (fibre reinforced plastic), metals and low density base materials.

Epoxy foam can be used as a base material or to fill cracks and holes.

Foaming time: 20 minutes at 22°C

Demoulding time: 2 hours

Shelf life: 12 months for resin and hardener

Property:

100gr pot life: 20-30 minutes

Mixing viscosity: 4,000 - 6,000 cP

Resin viscosity: 8,000 - 15,000 cP

Hardener viscosity: 2,500 - 3,000 cP

Foaming time: 20-25 minutes

Demoulding time: 120 minutes

The total volume, ambient conditions, proportions and dimensions of the casting will affect the rate of expansion and thus the final density.

A large vertical casting will generally be larger and have a lower density than a casting made in a smaller horizontal format.

The theoretical volumetric expansion of the foam corresponds to 4 times the original liquid volume. The actual expansion rate will be between 3 and 4 times the original liquid volume.

We recommend testing the final configuration of the part to ensure that the cavity is completely filled, especially in the case of blind casting.