Translucent epoxy resin suitable for multiple applications: floors, collages, molds and repairs
Translucent bi-component resin with extreme mechanical resistance to wear and abrasion.
Self-smoothing resin, glossy appearance, used for the agglomerate of various materials (quartz, pebbles ...)
Versatile resin used for various seals and collages, for inclusion ...
Main Uses: Zero Tires, Mortar, Anchors, Part Seal
For a primer (roller application): 0.250 to 0.400 kg / m² depending on the porosity of the substrate.
For a zero-drawn (application to the smooth or notched squeegee): 1 to 2 Kg / m².
For a mortar (Application to the plate): for 5 mm thickness: 11 Kg / m² / for 10 mm thickness: 22 Kg / m
Substrate preparation: Substrates must be dry, free from dust, grease, oil, moisture, curing compound, friable or non-adherent parts and they must not undergo capillary rise in moisture. The stripping is done by mechanical action (sanding, planing, shot blasting, diamond sanding)
Preparation of the mixtures: The components (Comp.A resin + hardener Comp.B) are delivered pre-dosed.It should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric stirrer equipped with a pale helicoid (not right) with a diameter about 2.5 times smaller than the diameter of the seal.
For a draw to zero: Add quartz HN 34 / HN 38 in a ratio of 1kg to 1kg. Application to the raclette.
For a mortar: First mix the 2 components and then incorporate our aggregates for mortar or quartz HN 31 in a ratio of 1 kg EPOXTYL (resin + hardener) for 6 kg of quartz or aggregates. Spread the mixture over the cool primer and the trowel with a steel drier.