RESMULTI10

New product

2 Items

Last items in stock!

MultiEpox Multipurpose epoxy resin 10kg

152,59 € Tax included

MultiEpox is a translucent two-component epoxy binder suitable for multiple applications: agglomerating materials such as quartz, dust finishing or sealing parts.

Self-smoothing resin with a glossy appearance, mainly used for agglomerating various materials (quartz, pebbles, etc.).

Main uses : zeroing, mortar, anchors and anti-dust.

Consumption :

For a primer (roller application): 0.250 to 0.400 kg/m² depending on the porosity of the substrate.

For a zero pull (smooth or notched squeegee application): 1 to 2 kg/m².

For a mortar (Application with a trowel) : for 5 mm thickness 11 Kg/m² / for 10 mm thickness : 22 Kg/m².

Substrate preparation : Substrates must be dry, free of dust, grease, oil, moisture, curing agent, loose or friable parts and must not be subject to rising damp by capillary action. Stripping is done by mechanical action (sanding, planing, shot-peening, diamond sanding).

Preparation of the mixtures : The components (Comp.A resin + Comp.B hardener) are delivered pre-dosed and should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator equipped with a helical blade (right-handed pitch) with a diameter approximately 2.5 times smaller than the diameter of the seal.

For a zero pull : Add quartz HN 34 / HN 38 in a ratio of 1kg for 1kg. Application with a squeegee.

For a mortar : First mix the 2 components and then incorporate our mortar aggregates or quartz HN 31 in a ratio of 1 kg MultiEpox (resin + hardener) for 6 kg of quartz or aggregates. Spread the mixture over the fresh primer and trowel it with a steel trowel.

Brand RESINE-NET
Packaging 10kg
Open time 2h
Color Colorless