Polyurethane patch for leveling and smoothing floors
Bi-component polyurethane resin for leveling and patching new and old floors
Continuous coating, seamless, shrink-free, waterproof. Applies to our primary
Main uses: leveling wood and concrete floors to easily glue or apply any kind of flooring: parquet, floating floors, linoleum, carpet ...
Consumption: Consumption depends on the state of the support. About 1.5 - 3kg / m² for a thickness of 3mm
Substrate preparation: Substrates must be dry, free from dust, grease, oil, moisture, curing compound, friable or non-adherent parts and they must not undergo capillary rise in moisture. The stripping is done by mechanical action (sanding, planing, shot blasting, diamond sanding).
The use of our PREPOX Solvent Free Epoxy Primer is highly recommended. For steel and aluminum, the preparation of the substrate is done by sandblasting to a degree of care SA 2,5 minimum
Preparation of the mixtures: The components (Comp.A resin + hardener Comp.B) are delivered pre-dosed.It should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric stirrer equipped with a pale helicoidal (not right) diameter about 2.5 times smaller than the diameter of the bucket.