POXYRIVER (15 kg) : epoxy coating and casting resin

POXYRIVER Résine époxy de revêtement et de coulée 5kg

Résine époxy polyvalente permettant la réalisation de rivière (résine de coulée) ou la réalisation de moquette de pierre en intérieur.

Conditionnement: 15kg

Couleur: incolore 

Two-component epoxy resin used as interior stone carpet or casting resin.

Continuous coating, no shrinkage, waterproof.

Good resistance to wear, acid abrasion, UV

Main uses: habitat, office, showroom, river table, casting in objects

Use in casting resin:

Mix 3.5 parts of resin and 1.5 parts of hardener for 2.5 to 3 minutes at a speed of 400 rpm with an electric stirrer equipped with a pale helicoïdale with a diameter about 2.5 times smaller than the diameter of the seal.

Pour 1.5 to 2 cm of the mixture per layer

Wait 4 to 6 hours between each layer at a temperature of 20 ° C

Before pouring, make an impregnation of the wood with the brush.

When making this, put on polyane or plywood board

Theoretical density of the mixture: 1,11

Use in stone carpet:

Mix both components for 2.5 to 3 minutes at a speed of 400 rpm with an electric stirrer equipped with a helical (not right) pad with a diameter about 2.5 times smaller than the seal diameter.

Let the mixture stand for 10 minutes, the maturation time required to obtain a perfectly crosslinked, resistant and optimal aesthetic appearance.

After this period, a coarser second mixing must be done to homogenize the whole

For the coating of a semi-smooth coating in 0.4 / 0.8 colored quartz, the application is made with a rubber squeegee.

Consumption: 0.600 to 0.700 kg / m²

For a stone carpet, mix 6 to 8% of the mixture, calculated according to the weight of the aggregates (colored marble or quartz 3 to 5mm). Mix the resin and the aggregates with a kneader powerful enough to homogenize the whole. Spread the mixture evenly on the floor and then tighten and smooth with a buncher.

Consumption: 0.600 to 0.700 kg / m²