Self-leveling bi-component epoxy resin for protection, repair and finishing of floors.
Possibility of different anti-slip variants giving it a grainy appearance to ensure the protection of users.
Washable with water jet
Color: thank you to count a delay of 1 week of manufacture. To choose your color, please refer to a RAL
Bi-component, self-leveling epoxy resin for the protection and finishing of new and old floors.
No shrinkage, waterproof, applies on our primary PREPOX.
Good resistance to UV, wear, acid abrasion ...
Main uses: industrial floors, garages, exhibition hall, laboratory, habitat ...
Consumption for a self-leveling coating: the application is done either with the 3x3x3 notched squeegee giving a thickness of 1 to 1.5 mm or with the squeegee of 5x5x5 giving a thickness of 2 to 2.5 mm. 1.6 to 1.8 kg / m²
Consumption for a semi-smooth coating: spread the mixture with a notched squeegee, debull and sprinkle the refusal quartz with rain. After drying clip and vacuum, then apply a closing layer to the rubber squeegee. 1.6 to 1.8 kg / m²
Consumption for a roller coating: pass 2 coats at a temperature of 20 ° C at a rate of 0.400 kg / m² per coat with a 16 hour interval between each of them.
Substrate preparation: Substrates must be dry, free from dust, grease, oil, moisture, curing compound, friable or non-adherent parts and they must not undergo capillary rise in moisture.
The stripping is done by mechanical action (sanding, planing, shot blasting, diamond sanding).
Preparation of the mixture: The components (Comp.A resin + hardener Comp.B) are delivered pre-dosed.It is advisable to mix them during 2,5 to 3 mn at a speed of 400 rpm with an electric stirrer provided with a pale helicoid (not right) diameter about 2.5 times smaller than the diameter of the seal.