30 Item Items
Last items in stock!
206 Slow hardener of low viscosity when mixed with resin 105
Conditioning : 1 kg
Model : B
Pump : 301-B
Slow hardener of low viscosity.
Produces a rigid solid, high strength, moisture resistant, excellent bonding and coating property.
Can be used to extend assembly times under ideal working conditions.
Pot life at 25°C : 20 to 30 minutes
Curing to solid state at 21°C : 9 to 12 hours
Hardening up to maximum resistance at 21°C : 5 to 7 days
Minimum recommended working temperature : 16°C
for a mixture of 1kg on a porous surface at 25 ° C: 6.5 - 7.5 m²
for a mixture of 1kg on a non-porous surface at 25 ° C: 8.5 - 9.5 m²
Caution : For each size of resin can, there is a size of hardener can and a size of corresponding mini pumps. Make sure all cans and the pump have the same letter (A, B, C or D). If you have any doubt, do not hesitate to contact our customer service.
Dosing : Mini pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make a resin pressure for a hardener pressure.
Mixing : Mix resin and hardener for two minutes or longer at low temperatures. Scrape the sides and bottom of the pot when mixing.
|2||2%||Up to 2,59 €|
|3||3%||Up to 5,83 €|
|4||4%||Up to 10,37 €|
|5||5%||Up to 16,20 €|
|7||6%||Up to 27,22 €|
|Consumption||6.5 - 7.5 m² for 1kg of mixture (porous surface) 8.5 - 9.5 m² for 1 kg of mixture (non-porous surface)|
|Open time||20 to 30 minutes|
|Polymerization time||9 to 12 hours|
|Total polymerization time||5 to 7 days|