WS205F

New product

Fast hardener 205-E 200kg

Product on order. Minimum time 1 week and a half

4 841,92 € Tax included

Fast hardener 205 used to obtain a fast hardening

Conditioning : 200 kg

Model : F

Hardener 205 used in situations where rapid curing is required. This hardener makes it possible to have an epoxy mixture whose physical properties develop rapidly.

Produces a rigid solid, high strength, is a remarkable protection against water vapor, excellent bonding property and plaster

Pot life at 25°C : 10 to 15 minutes

Curing to solid state at 21°C : 5 to 7 hours

Hardening up to maximum resistance at 21°C : 5 to 7 days

Minimum recommended working temperature: 5°C

Consumption :

for a mixture of 1kg on a porous surface at 25 ° C: 6.5 - 7.5 m²

for a mixture of 1kg on a non-porous surface at 25 ° C: 8.5 - 9.5 m²

Caution : For each size of resin can, there is a size of hardener can and a size of corresponding mini pumps. Make sure all cans and the pump have the same letter (A, B, C or D). If you have any doubt, do not hesitate to contact our customer service.

Dosing : Mini pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make a resin pressure for a hardener pressure.

Mixing : Mix resin and hardener for two minutes or longer at low temperatures. Scrape the sides and bottom of the pot when mixing.

Dosing and mixing demonstration video

Quantity Discount You Save
2 2% Up to 193,68 €
3 3% Up to 435,77 €
4 4% Up to 774,71 €
5 5% Up to 1 210,48 €
7 6% Up to 2 033,61 €
Brand WEST SYSTEM
Packaging 200 kg
Consumption 6.5 - 7.5 m² pour 1kg de mélange (surface poreuse) 8.5 - 9.5 m² pour 1 kg de mélange (surface non poreuse)
Open time 10 to 15 minutes
Polymerization time 5 to 7 heures
Total polymerization time 5 to 7 jours

Complementary products