402-A Filler : Crushed fiberglass mix 1kg

The filler 402 is a high density filler consisting of loose chopped glass.

The finished repairs are incredibly strong, resilient and resilient.

When mixed with the epoxy, the result is a thick paste that can be carefully set up with a brush and can be held in place with PVC tape or a tear-off fabric to give a smooth finish to the repair.

This load is used for the repair of deep troughs caused by osmosis, damage to the rudder of a dinghy, a sailboat or impacts but also the repair on small sailboats.

Add a ratio of about 25% by weight